High Voltage

Post Reply
User avatar
Drunk Mexican
Moderator
Moderator
Posts: 162
Joined: Wed Feb 22, 2006 11:02 pm
City: West Linn
State: Oregon

High Voltage

Post by Drunk Mexican » Wed Mar 20, 2019 10:26 am

About 11 years ago I saw an old Oscilloscope from the 1960's in a flea market and I immediately fell in love with the design and thought it would be awesome to put a computer in one of them. When I got back home I looked on eBay for an inexpensive Oscilloscope and found one for sale near Salem.

So I drove down to buy it, and then I stored it for over 10 years. Multiple times I almost gave up on the dream, but finally after I finished my last mod I felt confident enough to try a project of this magnitude.

The Original Oscilloscope from the late 50's un-modded:

Image

Image

After I started the mod, I decided to add a base to the main box. The base started out looking like this:

Image

More to come...
↑↑↓↓←→←→BA

Contributing to the PDXLAN Community since PDXLAN 9

User avatar
Drunk Mexican
Moderator
Moderator
Posts: 162
Joined: Wed Feb 22, 2006 11:02 pm
City: West Linn
State: Oregon

The Wood Base

Post by Drunk Mexican » Wed Mar 20, 2019 11:18 am

I had never built anything out of wood before, so YouTube to the rescue!

Watched a few videos on how to make a box, using pocket holes, and multi-layer staining, and I'm off!

Image

Image

Image

Done!

Image

Cut out the holes for the pipes that will attach the base to the top:

Image

And then stained the box with multiple layers of Kona and Sunbleached, sanding in between coats for a nice distressed look:

Image

Attached the pipes, added handles and ready to mod the main box:

Image

Image

Image

Front USB 3.0

Image

Front VR Ports (HDMI + USB 3.0)

Image

Rear Panel I/O

Image

Image

Done!
I eventually cleaned this up a bit and replaced the DisplayPort port with HDMI, as I had major issues with several DisplayPort panel mount cables.

Image

And finally, I bid farewell to my nvidia Bottle Opener as it opened its last beer for me...
:cry:

Image

Image

Image

Image
↑↑↓↓←→←→BA

Contributing to the PDXLAN Community since PDXLAN 9

User avatar
Drunk Mexican
Moderator
Moderator
Posts: 162
Joined: Wed Feb 22, 2006 11:02 pm
City: West Linn
State: Oregon

The Power Supply

Post by Drunk Mexican » Wed Mar 20, 2019 11:18 am

This is by far one of my favorite parts of this mod.

A distressed Power Switch Box from a house:

Image

Cut a hole in the back for the fan intake:

Image

Cut a hole on the side for the exhaust vent, power cord and power switch:

Image

Added a Fan Grill and U-Channel Rubber Trim from MNPCTECH:

Image

Image

Image

Image

Time to rest...

Image
↑↑↓↓←→←→BA

Contributing to the PDXLAN Community since PDXLAN 9

User avatar
Drunk Mexican
Moderator
Moderator
Posts: 162
Joined: Wed Feb 22, 2006 11:02 pm
City: West Linn
State: Oregon

Cutting top and side panels on the main box

Post by Drunk Mexican » Wed Mar 20, 2019 11:19 am

Time to cut the box!

Using a removable motherboard tray from a Lian-Li case

Image

The rear I/O panel on the motherboard tray will be on top of the modded box. I first made several stencils out of paper until I got the fit to be perfect, then placed it over the metal box, made my marks and began cutting.

Image

And also cut the rear fan exhaust

Image

Next the window and a hole for a large gauge

Image

It pays to measure multiple times, perfect fit!

Image

Next I made Glow-in-the-Dark paint by mixing Glow Pigment with Matte Medium.
I used about twice the amount of pigment so that it would have some extra glow!

Image

I painted the inside of the case with the glow paint. The idea was that the PC lights would charge up the paint, and when I turn off my PC the case would reaming glowing on the inside.

Below are pictures of the bare case in a pitch black room, with the only light coming from the glow-in-the-dark paint inside the case.

Image

Image

This is the Gauge I was planning on adding to the side. I really wanted to mod more that I ever had before, so I purchased single LEDs and wired a white LED into this gauge so it would be illuminated when the PC was on.

Image

Image

Installation
Used Liquid Nails (strong glue) to attach the gauge.
The big red button will be the power button for the computer, and the toggle switches for the lighting

Image

Image
↑↑↓↓←→←→BA

Contributing to the PDXLAN Community since PDXLAN 9

User avatar
Drunk Mexican
Moderator
Moderator
Posts: 162
Joined: Wed Feb 22, 2006 11:02 pm
City: West Linn
State: Oregon

The Wiring & GPU

Post by Drunk Mexican » Wed Mar 20, 2019 11:19 am

I had never made my own wires before but I wanted ALL of this Mod to be made by me this time. So although I was going to need custom wires, I didn't want anything fancy that would look new and not match the time period or rugged look of the mod.

I searched online through a ton of different options and found this fantastic Green with Yellow 16 AWG striped wire that looked great against the gray, and fit the time period of the mod perfectly. I used for the entire mod. 24 Pin ATX, 8 Pin EPS (CPU), 2 x 8 Pin PCIe (VGA), and a SATA Power Connector for the Fans and Lightning.

I ended up using 250 Feet of wire throughout the entire mod.

Custom Wire

Image.

Image

Image

Image

Mounted the GPU between the base and the case using MNPCTECH Vertical GPU Mount.
In case you want to check it out: https://mnpctech.com/vertical-gpu-video ... ion-mount/

The Vertical GPU Mount was ionized black, so I painted it chalk-gray, then smudged it with chalk-black after that.

Image

Image

The green cables going around the perimeter of the base are the actual power cables for the GPU. They go from the GPU, all the way around the base, into the base, up the pipes into the top case, out the top of the case and back down into the Power Supply. GPU Power Cables alone was 136 Feet of wiring.

Image

ATX and EPS (CPU) Power Cables come out the back of the top box

Image
↑↑↓↓←→←→BA

Contributing to the PDXLAN Community since PDXLAN 9

User avatar
Drunk Mexican
Moderator
Moderator
Posts: 162
Joined: Wed Feb 22, 2006 11:02 pm
City: West Linn
State: Oregon

The Fans and The Lighting

Post by Drunk Mexican » Wed Mar 20, 2019 11:21 am

I used CaseLabs ( RIP :cry: ) FlexBay Fan/Radiator Mounts for the fans in the front and the rear of the case so they would match and would look like they belong together. The gun metal color matched the mod exactly, and I love the unusual grill pattern they used to use (reminds me of Star Wars).

Image

Image

Image

For the front intake fan, I used the Lepa Chopper in green, and it looks AMAZING!

Image

I did all custom wiring, even for the lighting.

I used 3 Nanoxia UV Rigid Light Strips, cut off the ends, wired them together and then used my own wire to power them from a single power source routed through the toggle switch on the side of the case.

Image

Image

* Big Red Button Powers the PC
* 1st Toggle Switch controls the white LED on the big power gauge
* 2nd Toggle Switch controls the Nanoxia UV LED Strips

Image

The UV Lights charge up the glow-in-the-dark paint, which looks really great when you turn them off

Image
↑↑↓↓←→←→BA

Contributing to the PDXLAN Community since PDXLAN 9

User avatar
Drunk Mexican
Moderator
Moderator
Posts: 162
Joined: Wed Feb 22, 2006 11:02 pm
City: West Linn
State: Oregon

Completed Work

Post by Drunk Mexican » Wed Mar 20, 2019 1:45 pm

Image

Epic Cable Management

Image

Image

Image

Image

Image

Ready for PDXLAN

Specs:

Asus H270M-Plus Motherboard
Intel i7 7700k
Corsair Vengeance RGB 32GB DDR4
EVGA GeForce GTX 1080 FTW
Toshiba/OCZ 500 GB M.2 NVMe (OS Drive)
Crucial MX500 1TB M.2 SATA (Games Drive)
EVGA SFX 650W Power Supply

:)
↑↑↓↓←→←→BA

Contributing to the PDXLAN Community since PDXLAN 9

User avatar
CyberCrist
Moderator
Moderator
Posts: 39
Joined: Sun Jan 21, 2007 4:30 pm
City: Vancouver
State: Washington

Re: High Voltage

Post by CyberCrist » Wed Mar 20, 2019 4:14 pm

I LOVE THIS MOD!
--
<End of Line>

User avatar
Drunk Mexican
Moderator
Moderator
Posts: 162
Joined: Wed Feb 22, 2006 11:02 pm
City: West Linn
State: Oregon

Re: High Voltage

Post by Drunk Mexican » Wed Mar 20, 2019 5:15 pm

CyberCrist wrote:
Wed Mar 20, 2019 4:14 pm
I LOVE THIS MOD!
Thank you!
Mod Log is now completed.
↑↑↓↓←→←→BA

Contributing to the PDXLAN Community since PDXLAN 9

User avatar
somethingcool
Specialist
Specialist
Posts: 32
Joined: Fri Oct 19, 2007 2:41 pm
City: Beaverton
State: Oregon

Re: High Voltage

Post by somethingcool » Wed Mar 20, 2019 5:41 pm

Well done sir, I'm always a sucker for pristine builds pretending they are not :D

User avatar
Drunk Mexican
Moderator
Moderator
Posts: 162
Joined: Wed Feb 22, 2006 11:02 pm
City: West Linn
State: Oregon

Re: High Voltage

Post by Drunk Mexican » Wed Mar 20, 2019 8:16 pm

somethingcool wrote:
Wed Mar 20, 2019 5:41 pm
Well done sir, I'm always a sucker for pristine builds pretending they are not :D
This made me smile
:)
↑↑↓↓←→←→BA

Contributing to the PDXLAN Community since PDXLAN 9

User avatar
xeromist
Chief Moderator
Chief Moderator
Posts: 82
Joined: Fri Dec 07, 2007 8:20 am
City: Sacramento
State: California

Re: High Voltage

Post by xeromist » Thu Mar 21, 2019 5:23 pm

This is super cool! Great work!
At a bus station, a bus stops. At a train station, a train stops. On my desk, I have a work station.

User avatar
Drunk Mexican
Moderator
Moderator
Posts: 162
Joined: Wed Feb 22, 2006 11:02 pm
City: West Linn
State: Oregon

Re: High Voltage

Post by Drunk Mexican » Fri Mar 22, 2019 7:41 am

xeromist wrote:
Thu Mar 21, 2019 5:23 pm
This is super cool! Great work!
Thank you!
↑↑↓↓←→←→BA

Contributing to the PDXLAN Community since PDXLAN 9

Post Reply